Main Power And Energy Saver Key; How To Turn On The Main Power; Energy Saver Key - Canon imageRUNNER 2202 Guide Rapide

Main Power and Energy Saver Key

This section describes how to use the main power switch and the Energy Saver key.

How to Turn ON the Main Power

This section explains how to turn ON the main power.
IMPORTANT
If you want to turn OFF the main power and then back
ON again, wait for at least 10 seconds before turning
ON the main power.
01
Make sure that the power plug is firmly
inserted into the power outlet.
WARNING
Do not connect or disconnect the power cord with
wet hands, as this may result in electrical shock.
02
Press the main power switch located on
the right side of the machine to the "I" side.
NOTE
The response of the buttons and keys may not be
optimal immediately after you turn ON the main
power of the machine.
14

Main Power and Energy Saver Key

Energy Saver Key

You can press [ ] (Energy Saver) to make the machine
enter the Sleep mode and reduce power consumption.
If the machine is idle for a certain period of time, the
machine will enter the Auto Sleep mode to minimize
energy consumption.
Press [ ] (Energy Saver) to cancel the Sleep mode and
resume normal machine operations.
NOTE
The machine can print documents from a personal
computer when it is in the Sleep mode.