About The Supplied Manuals; Navigating The Menu And Text Input Method; Connecting The Power Cord And Turning On The Power - Canon MF729Cx Mise En Route

About the Supplied Manuals

En
 Getting Started (This manual):
Read this manual fi rst. This manual
describes the installation of the
machine, the settings, and a caution. Be
sure to read this manual before using
the machine.
 Wireless LAN Setting Guide:
Read this manual with Getting Started.
This manual describes the wireless LAN
setup procedures and the causes
and solutions for troubles you might
face during setup. Be sure to read this
manual when connecting the machine
to a wireless LAN.

 MF Driver Installation Guide
(Provided DVD-ROM):
Read this manual next. This manual
describes software installation.
 e-Manual (Provided DVD-ROM):
Read the desired chapter to suit your
needs. The e-Manual is categorized by
subject to fi nd desired information easily.
12

Navigating the Menu and Text Input Method

System Manager Name
Administrator
A/a/12 #
Back <A/a/12>
Navigating the Menu
Item selection
Tap an item to select it.
Press to return to the previous
screen.
Text Input Method
Changing entry mode
Tap <A/a/12> to change the entry
mode. You can also press to change
the entry mode.
Entering text, symbols, and numbers
Enter with the numeric keys or

Connecting the Power Cord and Turning ON the Power

Do not connect the USB cable at this time. Connect it when installing software.
Viewing the e-Manual from the DVD-ROM
1 Insert the provided DVD-ROM in your computer*.
2 Click [Manuals].
3 Click [e-Manual].
* If AutoPlay is displayed, click [MInst.exe].
Depending on the operating system you are using, a security protection message appears.
If the provided DVD-ROM has been already inserted in your computer and [Manuals] is not
displayed, remove the DVD-ROM and insert it again.
A
Apply
<Apply> Numeric keys
Setting confi rmation
Tap the item.
However, when <Apply> appears, tap
<Apply>.
Moving the cursor (Entering a space)
Tap or to move the cursor. To enter
a space, move the cursor to the end of
the text, and tap
Deleting characters
. Delete with
deletes all characters.
Clear #
.
. Pressing and holding