Warranty - AVG AVO-308CS Instructions D'installation Et Guide De L'usager

MAINTENANCE (continued)
REPLACING THE LED LIGHT BULBS
Cut the power supply by turning the hood off. Wait for the LED lamps to cool. To prevent damage or to
avoid reducing the life of the new bulb, do not touch the bulb with your bare fingers. Replace the bulb by
manipulating with a tissue paper or cotton gloves.
If the new lights do not work, ensure that each lamp is properly inserted into its socket before requesting
the intervention of a service agent.
CAUTION: LED lamps can only be replaced with a new LED lamp. The lamp rating must be equal to the
one already used. Make sure all the control switches are off and the hood is unplugged or that the
breaker is OFF.
STEPS
:
• This range hood uses LED light fixture: 3W Max 12V LED
• Make sure the range hood is unplugged or turn OFF the breaker. Make sure the lights are cool to
touch.
• Place a flat-head screwdriver between the light housing and the hood body, gently pry up the light
housing and search for the metal clip.
• Apply force to the metal clip and pull out the light fixture. Disconnect the power cable and discard
the used light fixture.
• Reverse the steps to install a new LED light fixture. Turn the breaker or hood ON to test for operation.
SERVICE AND WARRANTY
We warrant our hood against defects in materials and workmanship under ordinary residential use for one
(1) full year from the date of original retail purchase. This limited warranty applies to any repair and /or
replacement parts.
This limited warranty is not subject to improper installation, accident, misuse, neglect, fire or other external
causes, alterations, repair or commercial use.
You can contact our Service Department from Monday through Friday, 8h30 to 16h30 (Eastern STD Time)
AGI SERVICE
Tel: 450.963.1303
Toll free: 1.888.651.2534
Fax: 450.963.1416
Web/E-mail: www.agiservice.ca / customer agintl.qc.ca
@
29