AVG AVO-308CS Instructions D'installation Et Guide De L'usager page 24

INSTALLING THE UNIT
Figure 1
Step 1: Mark the leveling point of the hood. Position
two mounting screws on the wall, leaving 1/8" off the
wall.
Step 2 Measure the width of the chimney then attach
:
the chimney mounting brackets to the wall at the
desired height, taking into account the minimum
clearance between the hood and the cooking surface
(see installation drawing on page 20
).
Step 3: Align hood-mounting holes to the screws on the
wall and hook the hood into place. Tighten screws to
secure hood to the wall. CAUTION: Make sure the
range hood is secure before releasing
!
Step 4: Slide a 6" round metal ductwork over the
Fig.2
Fig.3
adapter / plug (see Figures 2 or 3). Seal the joints with
metal tape
.
Step 5: Plug the power cord into the socket (see Figure 4).
24