Chapter 4 : Starting - Analog way SMART FADE SMF251 Manuel Utilisateur

SMART FADE™

Chapter 4 : STARTING

4-1. CONNECTIONS
Turn OFF all of your equipment before connecting.
Connect the AC Power supply cord to the SMART FADE
Connect your video sources (VCR, DVD, camera, laser disc, ...) to the C.V1, C.V2, S.VIDEO 1, S.VIDEO 2 and
RGB/S &COMPONENT (R-Y, Y, B-Y) inputs.
Connect your main computer source to the "COMPUTER INPUT 1" and your second computer source to
"COMPUTER INPUT 2" (front panel).
Connect all of your audio sources to the corresponding AUDIO INPUTS.
Connect the audio output to your sound system.
Connect the "DISPLAY OUTPUT" of the SMART FADE
projector, plasma screen,...).
Turn ON all of your input sources, the SMART FADE
NOTE: For switching operation please see Chapter 5 : OPERATING MODE
™
and to an AC power outlet.
™
to the DATA INPUT of your display device (data
™
(front panel switch) and then your display device.
Chapter 4 : STARTING
PAGE 9