Using The Precision Clean Pocket Accessory; Using The Total Clean Pocket Accessory - shark S4701 Série Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE PRECISION CLEAN POCKET ACCESSORY

Cleaning Tip: The Precision Clean Pocket Accessory is
ideal for small, uneven surfaces. The pointed tip is great for
edges and corners.
CAUTION: Make sure the Steam Mop is
unplugged or in Standby Mode while attaching
or removing the Precision Clean Pocket
Accessory. Avoid touching the Accessory, as it
will be very hot after steaming.
CAUTION: To avoid scalding injuries, always unplug
and allow the Steam Mop to cool before removing
or changing Accessories or Cleaning Pads.
CAUTION: Do not use on wallpaper.
1
Slide the Precision Clean Pocket Pad over the
Precision Clean Pocket Accessory so it fits snuggly.
2
Cinch the elastic band and slide the locking toggle
to tighten.
3
Attach the Precision Clean Pocket Accessory by
connecting it to the Direct Steam Nozzle until it clicks
into place.
4
When you press the Steam Control Button Accessory
Mode (ACCESSORY) will automatically be selected
and you can begin cleaning (LO and HI Settings are
not available for above-floor cleaning).
5
To remove the Precision Clean Pocket Accessory,
squeeze the Accessory Release Buttons, then slide
out the Accessory.

USING THE TOTAL CLEAN POCKET ACCESSORY

Cleaning Tip: The Total Clean Pocket Accessory is ideal
for large, flat surfaces. The pointed tip is great for edges
and corners.
CAUTION: Make sure the Steam Mop is
unplugged or in Standby Mode while attaching
or removing the Total Clean Pocket Accessory.
Avoid touching the Accessory, as it will be very
hot after steaming.
CAUTION: To avoid scalding injuries, always unplug
and allow the Steam Mop to cool before removing
or changing Accessories or Cleaning Pads.
CAUTION: Do not use on wallpaper.
1
Slide the Total Clean Pocket Pad over the Total Clean
Pocket Accessory so it fits snuggly.
2
Cinch the elastic band and slide the locking toggle
to tighten.
3
Attach the Total Clean Pocket Accessory by
connecting it to the Direct Steam Nozzle until it clicks
into place.
4
When you press the Steam Control Button Accessory
Mode (ACCESSORY) will automatically be selected
and you can begin cleaning (LO and HI Settings are
not available for above-floor cleaning).
5
To remove the Total Clean Pocket Accessory,
squeeze the Accessory Release Buttons, then slide
out the Accessory.
www.sharkclean.com
EN
16

Publicité

Table des Matières
loading

Table des Matières