Filling The Water Tank - shark GS300 Série Manuel Du Propriétaire

fig. 5

FILLING THE WATER TANK

1 Make sure the power switch is
OFF "0" then unplug the unit from
the power outlet.
2 Remove the water tank cap and
using a cup fill the water tank to
the max fill line. (fig. 5)
3 Replace the cap on the filling
inlet. Push the cap down and turn
clockwise making sure the arrows
are aligned.
fig. 6
USING THE STEAMER
Stand Mode
1 Make sure the steam bonnet is in
place during all usage.
2 Hang the garment on the garment
hook and begin steaming in an up
and down motion. (fig. 6)
Portable Mode
1 Remove the steam unit from the
base, pull the release button
towards you and lift the steam
unit off.
2 Hold the steam unit at waist level
in one hand or place on a table.
(fig. 7)
3 Steam the fabric in an up and
down motion.
www.sharkclean.com
ENGLISH
fig. 7
5