shark S4701 Série Manuel Du Propriétaire page 25

PROBLEM
My unit stopped steaming in
Above-Floor Mode.
POSSIBLE REASONS & SOLUTIONS
First, check that the unit is plugged in and the ACCESSORY Setting is selected.
Make sure the Steam Nozzle is not facing upward (see page 14). Make sure the
Accessory Hose is firmly secured to the Main Unit and the Accessory is firmly
secured to the Accessory Hose.
NOTE: The Accessory Hose should attach to the Main Unit with the Hose
Release Button facing the top/front of the Main Unit. See Page 15.
If the problem persists, unplug the Steam Mop and check the water level. Add
water if needed.
If you continue to experience a problem, please contact Customer Service at
1-800-798-7398 or consumer-services@euro-pro.com.
www.sharkclean.com
EN
24