Saw Chain Filing And File Gauges - Husqvarna 455e Rancher Manuel D'utilisation

Recommended cutting equipment for Canada
Following is a list of recommended cutting equipment for the Husqvarna chain saw model 455 Rancher, 455e Rancher
and 460 Rancher. The combinations of powerhead, bar and chain meet all requirements outlined in the CSA Z62.1-15
Chainsaws and Z62.3-11 (R2016)Chainsaw Kickback standards.
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy.
A hard nose bar having the same length and nose radius as a sprocket-nose bar may be considered to have equivalent
or less kickback energy than the sprocket-nose bar.
We recommend that you as replacement use the listed bars and chains or "Type C Low-Kickback Saw Chains" which
are available at your dealer.
Length, inch Pitch, inch
15 3/8
16 3/8
18 3/8
20 3/8
24 3/8
13 0,325
15 0,325
16 0,325
18 0,325
20 0,325
13 0,325
15 0,325
16 0,325
18 0,325
20 0,325
Note: For the saw chains above (if available) you are free to choose between 0,050" or 0,058" gauge drive links for the
corresponding bar, see the table below
Gauge, in.
0,050
0,058
Saw chain filing and file gauges
TECHNICAL DATA
Bar
Gauge, inch
1,5
1,5
1,5
1,5
1,5
1,3
1,3
1,3
1,3
1,3
1,5
1,5
1,5
1,5
1,5
Saw chain designation
H80
H81
Max. nose radius Type
11T
11T
11T Husqvarna H42
11T
11T
10T
10T
10T Husqvarna H30
10T
10T
10T
10T
10T Husqvarna H25
10T
12T
H46 H47
H42 H48
Chain
Drive link count
56
60
68
72
84
56
64
66
72
80
56
64
66
72
80
English – 41