Single Control Bar (Flow Chart) - Mettler Toledo AE163 Mode D'emploi

OPERATION: How the single control bar operates.
Your balance is equipped with only one operating bar. This control bar permits the display to be switched on/off, the balance to be configured and weight to be tared.
In order to have the balance operate under the most ideal conditions, it must be configured accordingly. The configuration cycle is started by pressing and holding the
control bar. The individual configuration modes appear in the display in abbreviated form. After releasing the control bar and then briefly pressing it again, a selection
can be made between different steps. (exception: calibrating)
6
rng
Taring Weighing range
=0000 rng
See page 5 See page 7
Calibration
CAL
Integration time
Press briefly
Int
See page 8
Press & hold
Stability detector
ASd
See page 8
Weighing
rng
rng
For calibration
procedure
100
See page 7
Int
Int - 2 -
ASd
ASd - 2 -
Wait
160
30
- 1 -
Int - 3 -
- 1 -
ASd oFF
- - - -