System Overview - Sony UP-2300P Mode D'emploi

System Overview

Printouts that can be made with the printer
The UP-2000 series color video printer is designed for capturing images from
video equipment such as VTR and for printing out high-resolution images, either in
256 shades in full color (about 300 dpi). You can make various types of printouts.
You can also add a caption onto the printout. You can operate the daily printer
operation by using the buttons and setup the printer interactively by picking from
displayed menus.
Printout of a full-size image (page 16)
Printout of two reduced images (page 32)
Capturing the whole screen
(only for UP-2850P/2950MD)
Printout of two reduced images
Capturing the center of the
screen (page 32)
Printout of four reduced images
(page 32)
You can add a caption onto printouts introduced here.
Printout of 16 reduced images (page 32)
Printout of identical images a)
Printout for stickers b) (page 42)
a) This can be used for identification photographs and
there are two types.
In one type, the size of one image in one printout
can be adjusted freely. In the other, the size of one
image is fixed.
For details, see page 43.
b) There are two types of sticker-printouts.
In one type, all images in a single printout are
identical. In the other, all images in a single printout
are different.
For details, see page 42.
(page 43)
7
Introduction