Sony UP-2300P Mode D'emploi page 48

Making Variations of Printouts (continued)
48
Operation
2
Select the memory page by pressing the MEMORY PAGE button.
3
Load the desired size by pressing the MULTI PICTURE button.
By pressing the MULTI PICTURE button, "LOAD SIZE: 1/2/3 appears.
Each time you press the MULTI PICTURE button, the LOAD SIZE number to
be loaded changes.
L OA D S I Z E 1 / 2 / 3
Change the LOAD SIZE number in
which the desired size setting is
registered green.
"LOAD SIZE; 1/2/3 disappears after a few seconds if you do not perform any
operation.
Q 1 A Q 1 A 2 2 2 2
Displays the number of images to be printed in one
sheet of paper according to the size set in step 3.
When you want to make a printout of images of the different size
Set the size in step 3 instead of loading the LOAD SIZE number. (See "To
decide the size" on page 44.)
4
Press the CAPTURE button at the instant the image you want to print appears
on the screen.
The number of images corresponding to the selected size are copied and
captured in the selected memory page.
To replace a stored image
1 When the memory image remains on the video monitor screen, press the
SOURCE/MEMORY button to display the source image.
2 Press the CAPTURE button at the instant the image you want to print
appears.
The previously copied identical images are replaced with the newly
captured copied images.
5
Press the PRINT button.
The identical reduced images of the same size are printed in a single printout.
L OAD S I Z E
1 / /
Display the LOAD SIZE number in which the
desired size setting is registered .
Q1 A 2 2
S
E XE C
S