Sony UP-2300P Mode D'emploi page 49

Making printouts for identification photograph with the fixed-size image
The printer allows you to make a printout with a full-size image, identical multiple
reduced images in FIXED IPP application mode.
You can select the number of identical reduced images on the menu on the
LAYOUT SETUP menu, but the number of reduced images depends on your TV
system.
• PAL TV system: FIXED IPP 1/4/6/9/16 are selectable.
• NTSC TV system: FIXED IPP 1/4/16 are selectable.
Note
When printing in FIXED IPP application mode, be sure to use paper and ink ribbon
cartridge of the UPC-2040A Self-Laminating Printing Pack. If not, a ribbon error
may occur.
Before making printouts for identification photograph with the fixed-size
image
• Select the application mode FIXED IPP. (page 25)
• Decide the number of images. (page 32)
• Prepare the UPC-2040A Self-Laminating Printing Pack
1
Start the video source.
This operation is done using the controls of the video equipment acting as the
source.
2
Select the memory page by pressing the MEMORY PAGE button.
3
Press the CAPTURE button at the instant the image you want to print appears
on the screen.
To replace a stored image
1 When the memory image remains on the video monitor screen, press the
SOURCE/MEMORY button to display the source image.
2 Press the CAPTURE button at the instant the image you want to print
appears.
The previously copied identical images are replaced with the newly
captured copied images.
4
Press the PRINT button.
The identical reduced images of the same size are printed in a single printout.
2 3 4
Operation
49