Sony UP-2300P Mode D'emploi page 70

Setting Up the Printer (continued)
70
Installation and Adjustment
2
Press the MENU button, then select INPUT SETUP menu by pressing the ı or
∫ button.
I NP U T SE T UP CO L OR n n n
/ COL / LA Y / PRN / I N / OUT /
I NP U T SE L V/ SV / RGB
H U E 2
CO L OR 0
O F F
G A I N
O F F S E T 0
A GC 0
/ O F F
Q 1 A 1
Switch IN to green by pressing the ı
or ∫ button. INPUT SETUP menu
appears.
3
Perform the adjustments as follows.
1 Select the adjustment item by pressing the ◊ or √ button.
2 Perform the adjustment by pressing the ı or ∫ button.
To adjust the color intensity, hue and contrast
Adjustment Menu adjustment
item
a)
Hue a) HUE
b)
Color intensity COLOR
OFF
GAIN
Contrast
OFFSET
Brightness
a) In PAL mode, no HUE adjustment is provided on the INPUT SETUP menu.
b) Adjust the color such that skin tones appear natural. For the COLOR and HUE adjustment, you
can correct the color intensity and hue of an NTSC composite video signal or a separated
luminance (Y) and chrominance (C) signal.
When the printout or monitor image appears blackish or whitish
Adjust the input signal to the optimum level for printing.
Menu adjustment item
AGC (Automatic Gain Control)
I NP U T S E T UP
/ c / I / p / I N / o /
Display IN in capital letters by pressing the
S
ı or ∫ button. INPUT SETUP appears.
Button and operation result
∫ button
The hue becomes greenish.
The color intensity strengthens.
In case of the black and white
image
The contrast strengthens.
Becomes brighter
Selection When selecting
ON
Normal (when the proper signal is input)
When the printout or monitor image appears blackish
OFF
or whitish.
ı button
The hue becomes purplish.
The color intensity weakens.
The contrast weakens.
Becomes darker