Publicité
Les langues disponibles
Les langues disponibles
grass; in this case, intervene promptly by touching up the paintwork using a rustproof paint to prevent
the formation of rust that would lead to corrosion of the metal.
Remove the transmission casing by removing the screws and clean around the transmission and
drive belts with a brush or compressed air once or twice a year.
Once every season, the drive wheels should be cleaned internally. Remove both wheels. Clean
the gear wheel and the wheel gear rim of grass and dirt using a brush or air compressor.
To replace the blade, undo the screw.Empty the oil tank before removing the blade
Reinstall as illustrated. Tighten the screw properly. Tightening torque 40 Nm. When replacing the blade, the blade screw
should also be replaced. to run briefly.
SYMBOLS
The following symbols can be found on the machine to remind you of the care and attention that are required during
use. The symbols mean:
Important: Read the operator's manual.
Warning! Keep hands and feet clear of the cutting deck when the machine is running.
Clear the mowing area, Keep children and others a safe distance from the machine.
Warning! Keep bystanders away..
Sharp tines, beware of cutting fingers or toes, and remove spark plug lead before
maintenance.
•
CHANGING BLADES
Publicité
