Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT: This cutting machine is capable of amputating hands, feet and throwing objects. Failure to
observe the following safety instructions could result in serious injury or death.
WARNING: In order to prevent accidental starting when setting up, transporting, adjusting or
making repairs, always disconnect spark plug wire
WARNING: Engine exhaust, some of its constituents and certain vehicle components contain or
emit chemicals known to cause cancer and birth defects or other re productive harm.
CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after
engine has stopped. To avoid severe burns on contact, stay away from these areas.
I. GENERAL OPERATION AND SAFETY RULES
• Read the instructions carefully. Be familiar with the controls and the proper use of the
equipment.
• Do not put hands or feet near or under rotating parts. Keep clear of the discharge
opening at all times. 'Caution - Do not touch rotating cutting means';
• Only allow responsible individuals, who are familiar with the instructions, to operate the machine.
• Thoroughly inspect the area where the equipment is to be used and remove all objects
which can be thrown by the machine.
• Never mow while people, especially children, or pets are nearby.
.While mowing, always wear substantial footwear and long trousers. Do not operate the equipment
when barefoot or wearing open sandals.
• Do not pull mower backwards unless absolutely necessary. Always look down and behind before and
while moving backwards.
• Never operate the lawnmower with defective guards, or without safety devices, for
example deflectors and/or grass catchers, in place.
• Only use accessories approved by the manufacturer.
• Stop the blade(s) when crossing gravel drives, walks, or roads.stop the engine whenever you leave the
lawnmower,before refuelling;
• Stop the engine and disconnect the spark plug wire,
-before clearing blockages or unclogging chute,
-before checking, cleaning or working on the lawnmower.
-after striking a foreign object, inspect the lawnmower for damage and make repairs
before restarting and operating the lawnmower.
-if lawnmower starts to vibrate abnormally (check immediately).
• Shut the engine off and wait until the blade comes to complete stop before removing grass catcher.
• Mow only in daylight or in good artificial light.
• Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.
• Avoid operating the equipment in wet grass,where feasible;always be sure of your footing on slopes;
Reduced footing could cause slipping, keep a firm hold on the handle and walk; never run.
• Disengage the self-propelled mechanism before starting the engine.
• Replace faulty silencers.
• Always wear safety goggles or safety glasses with side shields when operating mower.
• Remove obstacles such as rocks, tree limbs, etc.
• Watch for holes, ruts, or bumps. Tall grass can hide obstacles.
• Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance.
• Do not mow excessively steep slopes.
• Keep in mind that the operator or user is responsible for accidents or hazards occurring
to other people or their property.
• Be alert and turn machine off if children enter the area.
• For wheeled rotary machines, mow across the face of slopes, never up and down.
• Never allow children or people unfamiliar with these instructions to use the
lawnmower. Local regulations can restrict the age of the operator.
• WARNING—Petrol is highly flammable.
-store fuel in containers specifically designed for this purpose;
-refuel outdoors only and do not smoke while refueling;
-add fuel before starting the engine. Never remove the cap of the fuel tank or add
petrol while the engine is running or when the engine is hot;
-if petrol is spilled, do not attempt to start the engine but move the machine away
from the area of spillage and avoid creating any source of ignition until petrol
vapours have dissipated;
-replace all fuel tanks and container caps securely;
• Before using, always visually inspect to see that the blades, blade bolts and cutter
assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets
to preserve balance.
• Never tamper with safety devices. Check their proper operation regularly.
• Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage.
Allow machine to cool before storing.
Publicité
