AMIX AFF-3 Serie Manuel Utilisateur page 89

WEB INTERFACE
Network setting
Identification:
Hostname : This is the name of the equipment on the network , for example AFF25-3.
MAC address:
equipment numbers and the manufacturer.
INFO: For example for EC:D9:25:01:1C:94, the first group in decimal hex EC: D9: 25 is the login given
by the international authority for the Rami and AMIX manufacturings, the last group 11C94 is the
conversion to the decimal Hexa of the serial number 72852.
Use the following IP address:
IP address: The factory IP address is 192.168.0.122, if you want to change this address, click directly in
the box and edit the numbers.
Choose an IP for AFF. It should be under the same net as your router
Example1 :
If router IP is 192.168. .1 then AFF IP will be: 192.168. .xxx
Exemple2 :
If router IP is192.168. .1 then AFF IP will be: 192.168. .xxx
Attention :
- IP address should be unique in the net.
- After IP modification, enter new AFFseries IP address in your browser address window and validate.
Subnet mask:
Default gateway:
DNS SERVER:
Slave mode:
Enslave Display:
Server IP Address:
Be careful, you cannot have more than three displays in slave mode from a master display (or limiter).
AMIX
(Media Access Control) it is a unique and stored physical identifier, to identify the
1
0
This is the subnet mask in which the device is located
A logical entity that connects two computer networks.
DNS (Domain Name Service), a service for translating a domain name into information.
Allows to download and duplicate on this slave AFF, the copy of the display of a master
AFF. Function available from version 1.9 included.
Enable to activate this function and Disable to cancel it.
Enter here the IP address of the master AFF to be duplicated.
Do not forget to validate your settings by
clicking SAVE
1 (xxx between 2 and 254)
0 (xxx between 2 and 254)
41
Next
AFFseries-3