AMIX AFF-3 Serie Manuel Utilisateur page 73

AFF TOURING
6 - Female XLR socket for connecting the secondary sensor for C-weighting. Detection and switching
are automatic.
XLR 3 pts Female plug
1: Ground
2
2: Pt +
3
3: Pt -
1
7 - Female XLR socket (not connected) just to house the sensor for transport.
8 - 3/8" nut allowing the fixation on a microphone stand.
9 - Mains cable with Powercon supplied with the equipment
10
11
11 - USB plug to download the history and update the display:
, Download: With the power on, insert the USB key. The main display shows
display shows the download percentage. Remove the key after 100% display.
, Update : Switch off the power supply, insert the USB key with the update file, press the switch 10 (IP
control) permanently with a pointed tool, switch on the power supply again. The main display shows
BO, wait for the indication 100 % to remove the USB key.
AMIX
The types of compatible sensors are CAP40/50 or CAP65.
10 - IP control. Fugitive switch allowing:
25
, Press for 1 second to see the IP address on the
front panel display.
, On a press of 5 seconds to reset the IP
address and return to the factory default IP
address (192.168.0.122 )
Next
.
UP and a secondary
AFFseries-3