AMIX AFF-3 Serie Manuel Utilisateur page 54

DESCRIPTION
AFF Touring: Display / Recorder / Integrating sound level meter - Embedded web server - IP connection.
It is both in compliance with the NF S31-122-1 standard of January 2017 and Article R.1336-1-II -3° of
!
Decree No. 2017-1244 of 7 August 2017 on the prevention of related risks of the sounds amplified for
the part concerning the display of sound levels.
It also complies with article R.1336-1-II-2° of the same decree and with standard NF S31-122-1 for the
!
recording of sound levels.
The Integrating Sound Level Meter complies with Class 2 according to the IEC61672-1 standard of March 2014.
!
Visualization on three independent programmable displays in weighting A or C, in Leq1s, 1min, 5min,
!
10min, 15min, 60min and in LpC. Each display is configurable in basic color and according to overruns.
A 9-level trend predictive indicator, based on the Leq1min, makes it possible to better manage sound
!
management and to act smoothly and with anticipation to avoid overtaking Leq 10min or 15min.
Two relay outputs GPO1 and GPO2 (on RJ45) allow the triggering of an alarm or an external signaling.
!
Choice for each GPO of weighting A or C and Leq 1s, 1min, 10min or 15min.
Integration of an embedded web server, allowing configuration and consultation of sound levels in real
!
time. The IP link works with any OS, any browser and above all without having to download any specific
software.
Operating alone or in a network.
!
Continuous recording of sound levels in A and C weighted decibels, in the forme LAeq1min, 5min, 10min,
!
15min, 60min et LCeq1min, 5min, 10min, 15min, 60min sliding in steps of 1min, as well as LpC max 1min
and LAF max 1min.
The internal memory is dimensioned to store these values 24 hours a day and 7 days a week, for 6 months.
!
The AFF Touring especially designed for touring events.
!
The power is supplied by a Powercon, the sensor(s) are connected in XLR, the network can be connected in
etherCON. It is equipped with a 3/8" insert on the lower side to be able to position it on a microphone
stand and another one on the upper side to fix the sensor clamp. Four M4 inserts allow fixing by means of
a foot to the vesa standard.
It can operate either with a single sensor for both A and C-weighted measurements, or with two sensors
for A and C-weighted measurements separately. In the latter case, the sensors can be positioned where
the sound level is loudest according to the weighting.
AMIX
6
Suite
AFFseries-3