AMIX AFF-3 Serie Manuel Utilisateur page 86

WEB INTERFACE
Display setting:
The three displays have the possibility to change color according to the sound levels and according to
the levels that you are going to program.
The basic color will change a first time according to the threshold indicated at
second time according to the threshold indicated at
See next page for the choice of colors. You can disable this feature by turning off the
of each alarm.
Color setting:
The Brightness part (independently of the presets) allows to adjust the brightness of the displays in manual
or in automatic mode (sensitive photocell making it possible to adapt the brightness according to the
ambient light).
To allow a better visibility of the numeric values, it is possible to reduce the brightness of the units of
measurement,
AMIX
UnitDimming .
This page allows you to configure for each of
the three displays the thresholds of the
indicated sound levels
Alarm 2 Threshold.
"Alarm 2 Threshold"
This is the AFFserie3 colorimetry page .
Four presets allow you a quick choice of
colors.
Custom mode allows you to choose
independently for each display the basic
color Value
overshoots
of the units of measure
Similarly, it is possible to choose both high
and low colors for the trend predictor Leq
Limit Manager
38
Alarm 1 Threshold
"Alarm 1 Threshol"
.
"Enable" button in front
, the color change for the two
Alarm1 and Alarm2 and the color
Unit .
Less and Over.
Next
and
, then a
AFFseries-3