Opto Mos 2 - AMIX AFF-3 Serie Manuel Utilisateur

AFF TOURING
A - AFF TOURING rear panel
1 - RJ45 socket for Ethernet network (LAN) connection.
Can receive standard RJ45 plugs or EtherCON specific RJ45 plugs (category 5E)
PoE optional.
2 - Mains input socket type powercon; 100 to 240 V AC / 10 VA.
The cable "mains plug to Powercon" is supplied with the equipment.
3 - Four M4 nuts allow for fixing a 100x100 mm support VESA.
4 - RJ45 socket with OPTO MOS relay outputs that correspond to alarm level overruns.
Internal OPTO MOS wiring
CMD 2
CMD 1
Caution: Do not connect a computer to this socket, on-risk of damage to your network card.
The GPO1 and GPO2 relay outputs can also be used to trigger an audio recorder with time stamp
(equipment not supplied).
This allows if the setpoint is exceeded, to identify the sound level involved, music or noise of the public
(applause, shouting ...)
AMIX
1 2
1
+
SENSOR
-
2
4

OPTO MOS 2

5
6
7
OPTO MOS 1
8
1
2
4
5
7
8
3 4 5
Note :
Each OPTO MOS can be compared to a relay and
has all the advantages of a relay (alternative signals
possible, no polarization). A current limitation is
included and fixed at 200mA.
24
6
7
8
9
AFFseries-3