Multistage Cooking; Pre-Set Function - ETNA ECM163RVS Notice D'utilisation

Multistage cooking

You can set a maximum of 2 cooking stages.
Set the defrost function (if applicable) as the
first stage. A beep sounds after the end of
each stage and the next stage will start.
The Auto-menu cannot be used with this
mode.
example
You want to cook for 10 minutes at a
microwave power level of 100% and 5 minutes
at a microwave power level of 80%.
1 Press the 'MICROWAVE' button once for a
microwave power level of 100%.
2 Press the 'START/OK' button to confirm the
microwave power.
3 Turn the 'TIMER/WEIGHT' control knob.
Set the cooking time to 10 minutes.
4 Press the 'MICROWAVE' button twice for a
microwave power level of 80%.
5 Press the 'START/OK' button to confirm the
microwave power.
6 Turn the 'TIMER/WEIGHT' control knob.
Set the cooking time to 5 minutes.
7 Press the 'START/OK' button to start the
set programme.
1/4
2/5/7
3/6

Pre-set function

first set the clock (see the chapter entitled
"Setting the clock")
1 Set a cooking function. A maximum of
3 functions can be set (apart from the
defrost function). When using the "Auto
menu", only one function can be set.
2 Press the 'CLOCK/PRE-SET' button. The
current time is shown in the display. The
hours flash.
3 Turn the 'TIMER/WEIGHT' control knob.
Set the desired hours.
4 Press the 'CLOCK/PRE-SET' button. The
minutes flash.
5 Turn the 'TIMER/WEIGHT' control knob.
Set the desired minutes.
6 Press the 'START/OK' button to confirm the
set programme. When the set time arrives
two beeps will sound and the cooking
programme will start.
2/4
6
3/5