Cooking In Phases; Auto Cook - ETNA ECM280ZT Mode D'emploi

OPERATING INSTRUCTIONS

Cooking in phases

Auto cook

You can set a maximum of two phases in a cooking programme. If
defrost is a phase in a cooking programme, you should input this
first. A beep will sound when the first phase is ready, the second
phase starts automatically after the first phase.
Example
You would like to defrost food for 5 minutes, followed by cooking
for 7 minutes on 80% power.
1. Press twice on the defrost button.
The display reads 'DEF2'.
2. Turn the control dial to set 5 minutes defrost time.
The display indicates the set time.
3. Press the microwave button.
'P100' flashes in the display.
• Press again on the microwave button to set 80% power.
• You can use the control dial to set 80% power by turning the
dial.
4. Press the start button.
The selected power is now confirmed.
5. Turn the control dial to set 7 minutes.
The display indicates the set time.
6. Press the start button again.
The microwave switches on and the set time for the first phase
counts down in the display. The defrost symbol flashes in the
display.
• When the set time is reached, the set time of the second
phase appears in the display and the microwave symbol
flashes.
• When the set time of the second phase has been reached,
the current time appears again in the display, and you will
hear
5 beeps.
With this function you can prepare popular dishes very simply.
You set the weight and the microwave selects the correct time
automatically.
EN 15