Multistage Cooking - ETNA T2130 Notice D'utilisation

without using the pre-heating function
1 Press the 'GRILL/CONV./COMBI' button
once. G-1 flashes.
2 Turn the 'TIMER/WEIGHT' control knob to
the right. Select the hot-air function. Set
the desired temperature (the temperature
can be set between 140 and 230 °C).
3 Press the 'START/+30SEC./CONFIRM'
button to confirm the temperature setting.
4 Turn the 'TIMER/WEIGHT' control knob.
Set the cooking time (the maximum
cooking time is 95 minutes).
5 Press the 'START/+30SEC./CONFIRM'
button to start the set programme.
Clock/Pre-Set Microwave Grill/Conv./Combi.
1
Defrost Auto Reheat
Start/
Stop/Clear +30Sec./Confirm
3/5
2/4
Timer
Weight

Multistage cooking

You can set a maximum of 3 cooking stages.
Set the defrost function (if applicable) as the
first stage. A beep sounds after the end of
each stage and the next stage will start.
The Auto-menu cannot be used with this
mode.
example
You want to cook for 10 minutes at a
microwave power level of 100% and 5 minutes
at a microwave power level of 80%.
1 Press the 'MICROWAVE' button once for a
microwave power level of 100%.
2 Turn the 'TIMER/WEIGHT' control knob.
Set the cooking time to 10 minutes.
3 Press the 'MICROWAVE' button twice for a
microwave power level of 80%.
4 Turn the 'TIMER/WEIGHT' control knob.
Set the cooking time to 5 minutes.
5 Press the 'START/+30SEC./CONFIRM'
button to start the set programme.
1/3
Clock/Pre-Set Microwave Grill/Conv./Combi.
Defrost Auto Reheat
Start/
Stop/Clear +30Sec./Confirm
5
2/4
Timer
Weight