EUROM HEAT Plug-in Manuel D'utilisation page 26

remove the heater from the socket. Allow the heater to cool down and make sure
that whatever caused the overheating is removed or amended. The heater can then
be reused. If the problem persists or if you cannot find an obvious cause for the
overheating, turn the heater off immediately and take the plug out of the socket.
Contact a service point for repair.
Cleaning and maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common
cause of overheating so these should regularly be removed! Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning
or carrying out maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do

not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions! Make sure that no water gets into the
Use a vacuum cleaner to carefully remove any dust and dirt from the grills and

ensure that the air intake and outlet openings are clean. Be careful not to touch
or damage any internal parts during cleaning.
The heater contains no other parts which need maintenance. The appliance may

only be opened and/or repaired by properly authorized and qualified persons.
At the end of the season, store the cleaned heater upright, in the original

packaging if possible, in a cool, dry and dust-free place.
Removal
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should be
made suitable for reuse in order to prevent any adverse effects to
health and the environment caused by unregulated waste collection.
Therefore, please make sure that you bring old equipment to a
designated collection point. Alternatively, contact the original
supplier, who can make sure that as many of the components as possible can be
recycled.
26
device.