Stihl MSA 220 C Notice D'emploi page 85

24 General Power Tool Safety Warnings
Kickback is the result of tool misuse and/or incorrect
operating procedures and can be avoided by taking proper
precautions as given below:
– Maintain a firm grip, with thumbs and fingers encircling the
chain saw handles, with both hands on the saw and
position your body and arm to allow you to resist kickback
forces. Kickback forces can be controlled by the operator,
if proper precautions are taken. Do not let go of the chain
saw.
– Do not overreach and do not cut above shoulder height.
This helps prevent unintended tip contact and enables
better control of the chain saw in unexpected situations.
– Only use replacement bars and chains specified by the
manufacturer. Incorrect replacement bars and chains may
cause chain breakage and/or kickback.
– Follow the manufacturer's sharpening and maintenance
instructions for the saw chain. Decreasing the depth
gauge height can lead to increased kickback.
0458-795-9621-A
English
83