Abus TVAC19100A Notice D'utilisation page 44

E-mail setting
The e-mail settings are required for sending a notification.
Use SSL:
Tick the box to transfer the e-mail as encrypted. You receive
the required settings from your e-mail provider.
SMTP server:
Enter the SMTP server address here.
e.g. smtp.test.com
SMTP port:
Enter the SMTP port here.
e.g. 465
Username:
Enter the sender's e-mail address here.
e.g. xxx@test.com
Password:
Enter the password for the sender's e-mail address here.
Receiver:
Enter the recipient's e-mail address here.
e.g. xxxx123@test.com
We recommend using "googlemail" for sending e-mails.
Format SDCard
Format the SD card. For the permanent use of an SD card,
please use a Class 10 SD card.
All the data is deleted when the SD card is formatted. Please
make sure you save the data before formatting.
Overwrite SDCard
This function offers an overwrite function when the SD card is
full. As soon as the SD card is full, the system begins to
overwrite the oldest data.
This ensures that all the current data is recorded.
Format the SD card from time to time to avoid the card from
damage.
Profile setting
This function enables you to transfer settings you have already
made to other cameras. You can choose between "Load" and
"Save".
For a new IP camera, you only need to load the profile settings
here.
The following settings are saved:
time zone, video settings, motion detection settings, e-mail
settings, cyclical storage settings
44
English