Abus TVAC19100A Notice D'utilisation page 36

English
Option 2: No adapter cable necessary
Connect the camera with the power supply unit and wait
approx. 1 minute until the red and green LEDs light up.
Look in the network settings on your mobile end device in the
"Wireless" menu for available Wi-Fi networks. For initial setup,
the camera presents its own SSID named: XXXXXXXXX
Connect your mobile end device to this Wi-Fi. The Wi-Fi is
secured with the 12345678 security code.
Begin setting up the camera once the two LEDs are lit up
permanently. This can take about 60 seconds.
Following this you can proceed with the setup at point .

Adding the system
Open the app on your mobile phone and click on "Press to
add new system".
When starting the app for the first time, you are asked
whether you want to activate or refuse push notifications for
motion detection.
Please note that false alarms can occur for video surveillance
in outdoor areas.
36