Abus TVAC19100A Notice D'utilisation page 38


Saving the PIN code

Live view
Firmware information / PIN code / Notify
setting
Here you can see the current firmware version of
the system and save a PIN code. You can find
out how to enter a PIN code at.
If you want to save a PIN code for this app, proceed as
follows:
1. Open the "Setup PIN Lock" at
2. Enter a 4-digit PIN code and repeat it.
3. Put a tick at "Enable lock when starting".
When you have saved a PIN code, it will be requested when
you want to open the app.
Select the required camera from the selection list. Now you
see the live view of the camera. The picture is shown in the
4:3 mode. To view a 16:9 format, turn your mobile end device
90°.
Snapshot
Here you have the option of making a
screenshot of your live image. The image is
then saved in your photos on your mobile
device.
The pictures saved are stamped with the date
and time and saved in the photo gallery.
Audio
You have the option of activating or
deactivating the audio here.
Starting the recording
Here you can start a manual recording; the
recording time is one minute. The recording is
saved locally on the SD card and the following
icon appears in the live view. The
recording runs for 1 minute automatically and
cannot be interrupted.
Back
You can return to the camera overview here.
The last screenshot is always shown.
38
English