boso medicus family Mode D'emploi page 56

Measurement display
Blood pressure is a dynamic parameter and
can be affected by the patient's position,
e.g. sitting, standing, lying, moving, before
or during the measurement, physical con-
dition (stress, disease, etc.).
➡ If the measurement result is obviously
wrong, repeat the measurement.
The unit switches itself off automatically
after about 1 min. To repeat a measure-
ment, press the start/stop button again
briefly.
56
Allow at least two minutes bet-
2
ween measurements.
min
➡ If no further measurement is required,
remove the cuff from the arm.