HENX H36GC20 Mode D'emploi page 23

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Spring-loaded cutting-height
10.5
adjustment (See Fig. N)
WARNING: Do not at any time make any
adjustment to the lawn mower without first
stopping the motor, removing the battery
pack and waiting for the blade to stop
rotating.
WARNING: Keep your feet away from the
deck when adjusting its height.
The mower can be set to 5 cutting heights
between 1-1/5" (30mm) and 3" (75mm).
Choose the proper cutting height according
to the type and condition of the grass.
To raise the blade height
a. 1. Grasp the height-adjustment lever,
and move it outwards.
b. 2. Move the lever toward the back of the
mower and engage the lever in the
desired cutting-height position on the
mower deck.
To lower the blade height
a. Grasp the height adjustment lever, and
move it outwards.
b. Move the lever toward the front of the
mower and engage the lever in the
desired cutting-height position on the
mower deck.
To attach/detach the battery pack
10.6
(See Fig. O & P)
CHARGE BEFORE FIRST USE.
WARNING: If any parts are broken or
missing, do not attempt to attach the
battery pack to the mower or operate the
mower until the broken or missing parts are
replaced. Failure to do so could result in
serious injury.
a. The battery cover is hinged. Raise the
battery cover by lifting the front of the
cover.
b. Align the grooves in the battery
pack,with the raised ribs in the battery
compartment, and then insert the
battery pack into the compartment.
c.
Push the battery pack until you hear a
"click". The battery release button will
spring up when the battery pack is
securely attached.
d. To detach the battery pack, depress the
battery-release button to release the
battery pack, and then lift it out of the
compartment.
e.
Close the battery cover.
NOTICE: Make sure that the latch on the
mower snaps in to place and that the
battery pack is secured to the mower before
starting operation.
Starting/stopping the mower
10.7
(See Fig. Q, R & S)
WARNING: The operation of any lawn
mower can result in foreign objects being
thrown into your or others' eyes, which can
damage eyes severely. Always wear safety
glasses while operating the mower or while
performing any adjustments or repairs on
the mower.
WARNING: Ensure that other people and
pets remain at least 100' (30m) away from
the mower when it is in use.
WARNING: The blade will continue to rotate
for a few seconds after the mower is turned
off. Allow the motor/blade to stop rotating
before starting it again. Do not rapidly turn
the mower off and on.
CAUTION: Do not attempt to override the
operation of the safety button and bail
switch.
NOTE: The motor cannot be started unless:
• The side rails are fully extended
• Both green handle-locking clamps are
securely closed
• The handle is locked into Operating
Position.
To start the mower
a. Attach the battery pack to the mower
and close the battery cover.
NOTICE: Make sure that the latch on the
mower snaps into place and that the battery
pack is secured to the mower before
operation.
b. Depress the safety button
(See Fig. R & S).
c.
With the safety button depressed, pull
the bail switch upward to meet the
handle and release the safety button
(See Fig. S). The mower will start.
To stop the mower
a. Fully release the bail switch (See Fig. S).
English
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7063706

Table des Matières