Safety Guidelines; Explanation Of The Symbols - HENX H36GC20 Mode D'emploi

INTRODUCTION
Congratulations on your selection of a new
generation of 40 V Lithium-ion powered
lawn mower. It has been designed,
engineered and manufactured to give you
the best possible dependability and
performance. Should you experience any
problem you cannot easily remedy, please
contact HENX customer service centre
+800 - 86286286.
For use with the HENX 40V 2.5Ah, 5.0Ah,
7.5Ah battery packs (H36B25, H36B50,
H36B75).
BATTERIES SOLD SEPARATELY
This manual contains important information
on the safe assembly, operation and
maintenance of your mower. Read it
carefully before using the mower. Keep this
manual handy so you can refer to it at any
time.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
WARNING: Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known to the state of California to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals
are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.

1. Safety guidelines

Safety symbols
The purpose of safety symbols is to attract
your attention to possible dangers.
The safety symbols and the explanations
with them deserve your careful attention
and understanding. The symbol warnings
do not, by themselves, eliminate any danger.
The instructions and warnings they give are
no substitutes for proper accident
prevention measures.
WARNING: Be sure to read and understand
all safety instructions in this Operator's
Manual, including all safety alert symbols
such as "DANGER," "WARNING," and
"CAUTION" before using this tool. Failure to
following all instructions listed below may
result in electric shock, fire, and/or serious
personal injury.
Damage prevention and information
messages
These inform the user of important
information and/or instructions that could
lead to equipment or other property
damage if they are not followed.
Each message is preceded by the word
"NOTICE", as in the example below:
NOTICE: Equipment and/or property
damage may result if these instructions are
not followed.
WARNING: The operation of any
power tools can result in foreign
objects being thrown into your eyes,
which can result in severe eye
damage. Before beginning power tool
operation, always wear safety
goggles or safety glasses with side
shields and a full face shield when
needed. We recommend a Wide
Vision Safety Mask for use over
eyeglasses or standard safety
glasses with side shields. Always use
eye protection.

2. Explanation of the symbols

This page depicts and describes safety
symbols that may appear on this product.
Read, understand, and follow all instructions
on the machine before attempting to
assemble and operate.
Indicates a potential personal injury
hazard.
Read operator's manual. To reduce
the risk of injury,user must read
English
13