Instructions - HENX H36GC20 Mode D'emploi

outlet; therefore, they are always in
operating condition.
f. Be aware of possible hazards when not
using your battery powered lawn
mowers or when changing accessories.
Following this rule will reduce the risk of
electric shock, fire, or serious personal
injury.
g. Do not charge the battery pack
outdoors.
h. Use only the charger supplied by the
manufacturer to recharge.
i. Do not leave lawn mowers unattended
when the battery is inserted. Remove
the battery when the lawn mower is not
in use and before servicing.
j. Do not use to pick up flammable or
combustible liquids, such as gasoline,
or use in areas where they may be
present.
k. Do not operate lawn mowers in
explosive atmospheres, such as in the
presence of flammable liquids, gases,
or dust.
Use only with battery packs and chargers
listed below.
BATTERY PACK
H36B25,H36B50,
H36B75,H36B200
SAVE THESE INSTRUCTIONS!

5. Instructions

When using an electrical appliance, basic
precautions should always be followed,
including the following:
Training
5.1
a. Read the instructions carefully. Be
familiar with the controls and the
correct use of the machine.
b. Never allow children or people
unfamiliar with these instructions to
use the machine. Local regulations can
restrict the age of the operator.
c. Keep in mind, that the operator or user
is responsible for accidents or hazards
CHARGER
H36KC400
H36MC100
(XVE129-
4200300)
occurring to other people or their
property.
Preparation
5.2
a. Before use, always visually inspect the
machine for damaged, missing or
misplaced guards or shields.
b. Never operate the machine while
people, especially children, or pets are
nearby
Operation
5.3
a. Wear eye protection and stout shoes at
all times while operating the machine.
b. Avoid using the machine in bad weather
conditions especially when there is a
risk of lightning. d) Use the machine
only in daylight or good artificial light.
c. Never operate the machine with
damaged guards or shields or without
guards or shields in place.
d. Switch on the motor only when the
hands and feet are away from the
cutting means.
e. Always disconnect the machine from
the power supply (i.e. remove the
battery pack from the mains, remove
the disabling device or removable
battery) Whenever the machine is left
unattended, Before clearing a blockage,
Before checking, cleaning or working on
the machine, after striking a foreign
object, whenever the machine starts
vibrating abnormally.
f. Take care against injury to feet and
hands from the cutting means.
g. Always ensure that the ventilation
openings are kept clear of debris.
Maintenance and storage
5.4
a. Disconnect the machine from the
power supply (i.e. remove the plug from
the mains, remove the disabling device
or removable battery) before carrying
out maintenance or cleaning work.
b. Use only the manufacturer's
recommended replacement parts and
accessories.
c. Inspect and maintain the machine
regularly. Have the machine repaired
only by an authorized repairer.
English
19