Electrolux ECS5000 Mode D'emploi page 89

822_949_383 ECS5000_5200_Elux.book Seite 89 Donnerstag, 17. Januar 2008 1:58 01
Three pink bands:
Hardness level 3, hard
up to 3.7 mmol/l, or
up to 21° German hardness, or
up to 37.8° French hardness
Four pink bands:
Hardness level 4, very hard
over 3.7 mmol/l or
over 21° German hardness, or
over 37.8° French hardness
Setting and saving the water hard-
ness level
You can set 4 hardness levels. The cof-
fee machine is factory-set to hardness
level 4.
0 Check that the machine is off (all the
indicator lights are off).
0 Press the
at least 5 seconds. The four lights
, and
0 Press the
button (Fig. 19) repeat-
edly until the number of lights that are
on coincides with the hardness level
(for example, to set hardness level 3,
press the button until 3 indicator lights
come on together,
0 Press the
data. The coffee maker is now pro-
grammed to provide the descaling
warning when effectively necessary,
based on the actual hardness of the
water.
10 Meaning of the normal
operation indicator lights
The and
flashing
The machine is not ready to make cof-
fee (the ideal water temperature has
not yet been reached). Wait for the
indicator lights to come on steady
before making the coffee.
The and
on steady
The machine is at the right tempera-
ture and ready to make coffee.
button and hold it for
,
come on.
11
, and ).
button to save the
0 Fill the water tank as described in sec-
0 Rinse or descale the tank.
indicator lights are
0 Turn the steam knob anticlockwise
indicator lights are
0 Turn the grinding adjustment knob (Fig.
The light is on steady
The machine is delivering one cup of
coffee.
The light is on steady
The machine is delivering two cups of
coffee.
The steam light flashes
The machine is heating to the ideal
temperature to produce steam. Wait
for the light to come on steady before
turning the steam knob.
The steam light is on steady
The machine is ready to deliver steam
and the steam knob can be turned.
The light is on steady
The machine is ready for delivery using
ground coffee (see section 6 „Using
pre-ground coffee", page 84).
The light is on steady
The automatic descaling program is in
progress (see section 9.4 „Descaling",
page 87).
Meaning of the alarm indi-
cator lights and what to do
when they are on
The light is on steady
• The water tank is empty or is posi-
tioned incorrectly.
tion 3.2 „Filling with water", page 81,
and insert it fully.
• The tank is dirty or lined with lime
scale.
The light flashes
• The machine cannot make the coffee
and is noisy.
(Fig. 8) as described in section 4 „Mak-
ing coffee with beans", page 82,
note 10.
• The coffee comes out too slowly.
17) one click clockwise (section 5
„Adjusting the coffee grinder", page 84).
g
89