Table des Matières
Publicité
48
Installation
5. Suivez les instructions ci-dessous pour remplacer les orifices.
1/2" Wrench
Front Burner Orifice
Use a 1/2" open end wrench
a
to unscrew the two orifices.
Screw each LP orifice in so the
orifice protrudes 15/16" (24mm)
(indicating full insertion).
15/16"
24mm
© Travis Industries
(pour les installateurs qualifiés seulement)
Rear Burner Orifice
c
Apply thread sealant to the LP
orifices prior to installation. Use
the chart below to identify the
correct orifices.
Look here for the orifice identification
Front
Rear
4100728
b
NG
LP
#48
1.25mm
#39
.0625"
100-01254_000
Publicité
Table des Matières
