Density Determination Of Solids (Hydrostatic Weighing) - KERN PES 220-3M Mode D'emploi

10.4. Density determination of solids (hydrostatic weighing)

Density is the relationship of weight [g] : volume [cm
weighing the sample in air. The volume results from the ascending force [g] of the
sample dipped in a liquid. The density [g/cm
chimedes).
Operation
The density is determined with help of the underfloor weighing device.
Prepare the balance as follows:
• Turn-over the balance
• Screw-in hook for underfloor weighing (option)
• Put the balance over an opening
• Hook-in the sample support
• Fill measuring liquid in a vessel (e.g. beaker) and temper it.
Activate function [q SET 5]
(see chap. 7).
Selecting measuring liquid
[ 0 ]
: dest. Wasser
[ 1 ] :
Measuring liquid of your selec-
tion, density of which is known
If you selected distilled water [1q NED. 0] the water temperature is input (input
range 0.0 to 99.9°).
Press and keep pressed until the blink-
ing display appears
PES/PEJ-BA-e-1617
3
]. The weight is determined by
3
] of that liquid is known (principle of Ar-
Display
q�SET�5
1q�NED. � 0
0. 0
15.0
�
�
D
��
g
��
D�T
51