Piece Counting; Determination Of The Reference Weight By Weighing - KERN CPB-N Mode D'emploi

8 Piece counting

With pieces counting you can either count parts into a container or remove parts from
a container. To count a greater number of parts the average weight per part has to
be determined with a small quantity (reference quantity). The larger the reference
quantity, the higher the counting exactness. High reference must be selected for
small parts or parts with considerably different sizes.

8.1 Determination of the reference weight by weighing

Operation
 Reset balance to zero or tare the empty
weighing container if necessary.
Set reference:
 Place a known number of pieces on the
balance as reference
 Wait for the stability display, than enter the
number of individual items via the numeric
keypad. Confirm within 5 sec:
„SAMP" is shortly displayed;
The reference weight will be determined
and displayed.
32
Display

CPB-N / CPB-DM-BA-e-1831