Recording From An External Component Onto A Cd-R Or Cd-Rw Disc - Yamaha CDR-HD1000 Mode D'emploi

Recording from an External Component onto a CD-R or CD-RW Disc

NATURAL SOUND HDD/CD RECORDER CDR–HD1000
POWER
HDD CDR COPY
PHONES LEVEL
MIN MAX
<Preparing a CD-R or CD-RW disc>
1.
Press v (OPEN/CLOSE on the remote control) to
open the disc tray.
2.
Load a new CD-R or CD-RW disc, or a CD-R or CD-
RW disc without finalization on the disc tray.
Place the CD-R or CD-RW disc correctly aligned in the
recessed area of the disc tray with its recordable side facing
down.
3.
Press v (OPEN/CLOSE on the remote control) to
close the disc tray.
Note
• The disc tray can be also closed by pressing the front edge of
the disc tray gently. If a CD-R or CD-RW disc without
finalization has been loaded, this unit starts playback of that
CD-R or CD-RW disc. Press a to stop playback.
This unit starts reading the disc information (type and capacity
of the disc) when the disc has been loaded. It takes
approximately 10 to 15 seconds to complete the reading.
The following message appears on the display during the
reading.
R e a d i n g
2 1, 3
TEXT/TIME MODE/SET
TRACK NO. COMPLETE
BOOKMARK
REC FINALIZE ERASE
L GROUP
dB –30 –10 –6 –2 0
R
1, 3
MULTI JOG
PUSH ENTER
MENU
CLEAR
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
OPTICAL
COAXIAL
ANALOG
MIN MAX
When reading the disc information has been completed, the
display changes as follows and this unit becomes ready for
operation.
I When a CD-R or CD-RW disc without finalization is
loaded
Number of recorded tracks
I When a new CD-R or CD-RW disc is loaded
N e w D i s c
BASIC RECORDING OPERATION
OPEN/CLOSE
COPY REC
TRACK NO.
FINALIZE ERASE WRITE
TEXT/TIME INPUT
MODE/SET MENU
COMPLETE
CLEAR ENTER
Total recorded time
1 4 6 8 1 7
L
GROUP
dB –30 –10 –6 –2 0
CD–RW
R
1
L GROUP
dB –30 –10 –6 –2 0
CD–RW
R
L GROUP
dB –30 –10 –6 –2 0
CD–R
R
0
L GROUP
dB –30 –10 –6 –2 0
CD–R
R
15
E-