Yamaha CDR-HD1000 Mode D'emploi page 45

Track Pack
You can re-organize the track numbers by eliminating unused track
numbers, that have been created by changing track numbers or
erasing tracks.
1.
Select and confirm "Track Pack" in step 5 for "TRACK
EDITING" on page 37.
The following message appears on the display.
P a c k
2.
Select the disc on which unused track numbers are
to be eliminated by rotating the MULTI JOG knob
(pressing +/– on the remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc on which unused track
numbers are to be eliminated.
4.
Press COMPLETE.
The track numbers are re-organized by eliminating unused
track numbers.
Before "Track Pack" is performed
1 3
1 2 3
After "Track Pack" has been performed (Unused track numbers
have been eliminated.)
: Unused track numbers
0 0 1 ?
L
dB –30 –10 –6 –2 0
R
Disc on which unused track
numbers are to be eliminated
4 6
4 5 6
Add Fade In
You can add fade-in at the beginning of a track. The beginning of
the track is played with gradually rising level when fade-in has been
added.
1.
Select and confirm "Add Fade In" in step 5 for
"TRACK EDITING" on page 37.
The following message appears on the display.
Disc that contains the track to add fade-in
F d . I n
The disc number that contains the track to add fade-in flashes.
2.
Select the disc that contains the track to add fade-in
by rotating the MULTI JOG knob (pressing +/– on the
remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc that contains the track to
add fade-in.
The number of the track to add fade-in flashes.
4.
Select the track to add fade-in by rotating the MULTI
JOG knob (pressing +/– on the remote control).
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track to add fade-in.
6.
Press w/d (w on the remote control) to play the track
to add fade-in.
"Fd.In" and the fade-in length alternately appear on the display.
F d . I n
T i m e : 3
7.
Set the fade-in length by rotating the MULTI JOG
knob (pressing +/– on the remote control).
The fade-in length can be set in the 1 to 10 second range by 1
second increments.
TRACK EDITING
0 0 1 1 ?
L GROUP
dB –30 –10 –6 –2 0
R
Track to add fade-in
0 0 1
L
dB –30 –10 –6 –2 0
R
0 0 2
L
dB –30 –10 –6 –2 0
R
43
E-