WAGNER Plast Coat PC 25 Mode D'emploi page 26

GB
Suction pumps develop high spraying pressures.
Attention − Danger of injury!
Never reach into the spray jet with your fingers or hand!
1
Never aim the spray lance at yourself or other persons!
The materials sprayed cause chemical burns or irritations!
Protect your skin and eyes!
Each time before starting up, follow the procedure below as specified in the
2
Operating manual:
1. Only connect to the mains supply using a special distributing point, e.g.
using a site distribution system with fault current protection with INF ≤ 30
mA.
2. Observe the permissible pressures.
3. Check all the connecting parts for leaks.
3
Instructions for regular cleaning and servicing of the machine must be
strictly adhered to.
Before starting any work on the machine and during breaks, follow the pro-
cedure below:
1. Note the setting time of the material.
2. Relieve the pressure in the spray lance and hose.
3. Switch the machine off.
Be safety-conscious!
26
Warning!
Plast Coat 25 · 35