Warranty; Eu Declaration Of Conformity - Festool C 12 Li Notice D'utilisation D'origine

C 12 Li, C 15 Li
GB
14

Warranty

We offer a warranty for material and produc-
tion defects for all our tools in accordance
with the locally applicable legal provisions,
but for a minimum of 12 months. Within the
EU member states, the warranty period is 24
months (verification through invoice or deliv-
ery note). Damage caused by the operator,
natural wear, overloading, incorrect handling
or through the use of the equipment not
specified in the operating manual, or damage
which was known at the time of purchase, is
not covered by the warranty. Furthermore,
damage caused by the use of non-original
accessories and consumable materials (e.g.
sanding pads) is also excluded.
Complaints can only be accepted if the tool is
returned while still assembled to the supplier
or an authorised Festool Customer Service
workshop. Keep the operating manual, safe-
ty instructions, spare parts list and purchase
receipt in a safe place. Otherwise the current
warranty conditions of the manufacturer
shall apply.
Note
Due to continuous research and develop-
ment work, we reserve the right to make
changes to the technical content of this doc-
umentation.
15 EU Declaration of Conformi-
ty
Cordless drill
C 12 Li
C 15 Li
Year of CE mark: 2010
We declare under sole responsibility that this
product complies with the following direc-
tives and standards:
2006/42/EC, 2004/108/EC, EN 60745-1, EN
60745-2-1, EN 60745-2-2, EN 55014-1.
18
Charger
TRC 3
Year of CE mark: 2007
We declare under sole responsibility that this
product complies with the following direc-
tives and standards:
2004/108/EC, 2006/95/EC, EN 60335-1, EN
EN 60335-2-29, EN 61000-3-2, EN 61000-3-
3, EN 61204-3.
Festool GmbH
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Techni-
cal Documentation
20.10.2009
REACh for Festool products, its accesso-
ries and consumable materials:
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream
users" and product manufacturers, we are
aware of our duty to provide our customers
with information. We have set up the follow-
ing website to keep you updated with all the
latest news and provide you with information
on all the materials used in our existing prod-
Serial no.
ucts:
496703
www.festool.com/reach
496702
Serial no.
494635, 494636,
494637