Installation Under Windows 98 Se And Millennium; Removing The Vx Driver For Windows 98 Se And Millennium - Digigram VXpocket 440 Manuel Utilisateur

D i g i g r a m
Installation under Windows 98 SE and
Millennium
Windows 98 SE and Millennium will automatically detect the card
and will run the hardware installation wizard as follows (be aware
that some differences may occur depending on the Windows version
you use).
•
If the driver has been downloaded from our web site, it has to be
expanded prior to the driver's installation as follows. Double-
click on the downloaded file (self-expanding). You can use the
default destination location (Windows temporary folder) or
select another directory.
•
The wizard will detect the card when it is inserted, and prompt
for a new driver.
•
Click Next to start the driver installation.
•
Select Display a list of all the drivers Display a list of all the drivers... to select a specific Display a list of all the drivers Display a list of all the drivers
driver and click Next Next. Next Next
•
Select the Sound, video and game controllers category and click
Next Next.
Next Next
•
Click on the Have Disk Have Disk button. Have Disk Have Disk
•
Browse to the drive where the installation files are located (on
the CD-Rom, in \download\win9x-winme4b, or in the extracted
destination folder) and click OK
•
The wizard should display the suitable driver. Click OK
continue.
•
Click on the Next Next button to start copying the driver files.
Next Next
•
Click on the Finish Finish Finish button to complete the driver installation. Finish
Reboot is not necessary.
•
The ASIO driver for Windows 98 SE and Millennium is
automatically installed during the VX driver installation process.
No additional installation is required.
The registry information is updated so that the ASIO compliant
programs show the Digigram VX ASIO driver in the list of available
ASIO drivers. To take full advantage of your VXpocket 440, select
the Digigram VX ASIO driver from the application program's specific
audio I/O settings.
Removing the VX driver for Windows 98 SE and
Millennium
To remove the VX driver, make sure the card is present before
starting the following procedure:
•
From the Start Start Start menu, Se Se Se Settings Start
Add/Remove Programs panel. Add/Remove Programs
Add/Remove Programs Add/Remove Programs
•
Select the 'Digigram VX Kit ...' and remove it.
•
Follow the instructions of the InstallShield wizard.
12
OK.
OK OK
ttings: Control Panel ttings ttings Control Panel, open the Control Panel Control Panel
OK OK to OK