How To Check The Installation; Installing The Vx442 Driver Under Windows 98 Se, Millennium, 2000 And Xp - Digigram VX442 Manuel Utilisateur

How to check the installation

•
Go to the <System Preferences> <Sound>. You should see the "built-
in" sound icon, plus the VX442 icon if your VX442 is properly
installed.
•
Your VX442 is now ready for use.
Installing the VX442 driver under Windows 98 SE,
Millennium, 2000 and XP
Windows will automatically detect the card and will run the hardware
installation wizard as follows (be aware that some differences may occur
depending on the Windows version you use).
•
The wizard will prompt for a new driver.
•
Click Next to start the driver installation.
•
Select Display a list of all the drivers... to select a specific driver
and click Next.
•
Select the Sound, video and game controllers category and click
Next.
•
Click on the Have Disk button.
•
Browse to the drive where the installation files are located (on the
CD-Rom, they are in \VX442\win9x-winme or \VX442\win2k-
winXP), and click OK.
•
The wizard should display the suitable driver. Click OK to
continue.
•
Select Continue anyway if Windows displays the following
message:
"The software has not passed Windows Logo testing".
•
Click on the Next button to start copying the driver files.
•
Click on the Finish button to complete the driver installation.
Reboot is not necessary.
The registry database is updated so that the ASIO compliant programs
show the Digigram VX442 ASIO driver in the list of available ASIO
drivers. The same goes for the EASI and GSIF drivers. To take full
advantage of your VX442, select the type of driver that corresponds to
the application used in the program's specific audio I/O settings menu.
VX442
User's Manual
9