Note on microphone and gain input gain:
Note on microphone and gain input gain:
Note on microphone and gain input gain:
Note on microphone and gain input gain:
The VXpocket 440 has three input gains: 0dB, +30 dB, and +48 dB. 0 dB is the
line gain, +30 dB and + 48 dB are the microphone gains.
For a gain of 0 dB, a +10 dBu maximum input signal gives 0dBfs (digital full
scale).
For a gain of +30 dB, a – 20 dBu maximum signal gives 0dBfs (digital full scale).
For a gain of +48 dB, a – 38 dBu maximum signal gives 0dBfs (digital full scale).
Let N be the nominal input level, and H the input headroom.
N and H values must be set so that: N + H
The following must be done to switch the input to microphone gain:
* N + H = - 38,
* if the fader Analog In
Analog In is set to a gain higher or equal to 0 dB, the micro gain is
Analog In
Analog In
+48 dB.
* if the fader Analog In
Analog In is set to a gain lower than 0 dB, the micro gain is +30
Analog In
Analog In
dB.
* the Analog In
Analog In balance fader should not be used in microphone gain mode, as
Analog In
Analog In
this would modify the microphone gain value.
VXpocket 440
User's Manual
≤
maximum input level.
25