Clock Source; Faders; Speakers (Output); Wave Out (Output) - Digigram VXpocket 440 Manuel Utilisateur

VXpocket 440
User's Manual
Analog input: Analog input: selects analog input, analog or digital gain can be applied
Analog input: Analog input:
depending on the sound card features.

Clock source

This option allows the selection of the synchronization clock source.
Automatic: Automatic: Automatic: Automatic: selects the internal clock when analog input is selected, the
digital input clock when digital input is selected.
Digital: Digital: Digital: Digital: selects the digital input regardless of the source input selection.
Synchro: Synchro: selects the digital input as clock source only for playback. We do
Synchro: Synchro:
not recommend the use of this mode.

Faders

Various faders allow you to adjust input, output and monitoring level. The
faders can be reset by double clicking on their respective buttons..

Speakers (Output)

Applies an analog gain on the selected output device.

Wave out (Output)

Applies a digital gain.

Monitoring

Applies a digital gain on the hardware monitoring.

Wave in (Input)

Applies a digital gain.

Analog (Input)

Applies an analog gain prior to the analog to digital conversion.

Digital (Input)

Applies a digital gain to the digital input signal or on the digital signal after
analog to digital conversion, but it is recommended to use only the analog
input level controls when recording from analog inputs.
23