Removing The Vx Driver For Windows 2000; Updating The Vx Driver For Windows 2000; Installation Under Windows Xp - Digigram VXpocket 440 Manuel Utilisateur

D i g i g r a m
The DirectSound and ASIO drivers are now installed. To install the
Wave driver, proceed as follows:
•
Open Add/Remove Hardware Add/Remove Hardware in the control panel.
Add/Remove Hardware Add/Remove Hardware
•
Click on Next Next Next Next
•
Select Add/Troubleshoot Add/Troubleshoot a device
Add/Troubleshoot Add/Troubleshoot
PnP devices.
•
Again, select "Add a new d Add a new de e e e vice Add a new d Add a new d
•
Select "No, I want to select the hardware from a list No, I want to select the hardware from a list", and
No, I want to select the hardware from a list No, I want to select the hardware from a list
Next. Next.
Next. Next.
•
Select Sound, video and game controllers Sound, video and game controllers Sound, video and game controllers from the list, and Sound, video and game controllers
Next. Next. Next. Next.
•
Select Digigram Digigram Digigram from the manufacturer list and 'Digigram Wave Digigram
for VX' for VX' from the list displayed on the right.
for VX' for VX'
•
Click on Next Next in the following windows. Next Next
•
Click on Finish Finish to complete the installation, and restart the Finish Finish
computer.
The wave driver is installed.
Note: To install the Wave driver, DirectSound must have been successfully Note: Note: Note:
installed on the system before!

Removing the VX driver for Windows 2000

•
Go to Add/Remove Programs Add/Remove Programs located in the Windows Control
Add/Remove Programs Add/Remove Programs
Panel.
•
Select the 'Digigram VX Kit... Digigram VX Kit... Digigram VX Kit...' and remove it. Digigram VX Kit...
•
Follow the instructions of the InstallShield wizard.

Updating the VX driver for Windows 2000

•
In the Start Start menu, click on the Settings
Start Start
command.
•
Remove the driver as described above.
•
Run the installation program of the new driver (See chapter:
"Installation under Windows 2000").

Installation under Windows XP

•
Once you have inserted your VXpocket 440 sound card,
Windows Plug and Play wizard will detect it and request a
driver.
•
As the installation must be done using the provided setup
program, click on Cancel
wizard.
•
Insert the VX kit CD-ROM. The welcome page should
automatically open in your usual web browser. Go to your
14
a device. Windows is now looking for
a device a device
vice" in the list, and click Next vice vice
Settings: Control Panel Control Panel
Settings Settings Control Panel Control Panel
Cancel and close the Windows Plug and Play Cancel Cancel
Next. Next Next
Digigram Wave Digigram Wave Digigram Wave