Publicité
Les langues disponibles
Les langues disponibles
Description, Composition and Installation
1. ON/OFF switch
2. Thermostat dial
3. Base
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your
vendor for inspection or replacement.
Do not use the heater before it has been installed in accordance with the
Attachment materials supplied
2 hanging brackets
2 fixing brackets
4 short screws
4 long screws
4 plugs
Free-standing (as a portable heater):
Attach the feet supplied to the underside of the heater (see picture):
Turn the heater upside down.
Place a blanket (or something
similar) under the heater to
prevent damage!
Place the feet on their place
on the bottom of the heater.
This will ensure that the
threaded
holes
correctly.
Securely attach the feet to the
heater using the 2 x 2 short
self-tapping screws.
Return the heater to the
upright position.
Make sure a working heater is
always placed on a solid, flat
and horizontal surface. Deep-pile carpeting is unsuitable!
following instructions!
will
align
16
Publicité
