Technical Data - Parkside EURO 270/8/24 Mode D'emploi

Anleitung_Euro_270_8_24_mehrspr:_
GB

7. Technical data

Power supply:
Motor rating in kW:
Compressor speed in rpm:
Operating pressure in bar:
Pressure vessel volume in litre:
Theoretical intake rate in l/min.:
Sound power level L in dB:
WA
Sound pressure level L
pA
Protection type:
Machine weight in kg:
8. Instructions for the 5-piece
accessory set
For information on the correct use of the
accessories, please refer to the following
overview.
Compressed air hose
For connecting to a compressed air source.
Blow-out pistol (Figure 11)
Working pressure in bar:
Range of applications:
For cleaning and blowing out hollow spaces
or hard-to-reach areas, as well as for
cleaning soiled equipment.
The infinitely variable trigger lever allows
an exact dosing of compressed air.
Tire pressure gauge (Figure 12)
Working pressure in bar:
Range of applications:
The tire pressure gauge allows you to
inflate tires easily and exactly. Use the
pressure gauge to check the tire pressure.
If the tire pressure is too high, you can
reduce the pressure with the integrated
relief valve ().
22
08.06.2007 9:58 Uhr
230 ~ 50 Hz
1.8
2850
max. 8
24
270
98
in dB: 74
IP 20
27
3-6
9. Instructions for the adapter
For information on the correct use of the
adapters for the various valves, please refer to
the following overview:
1-8
Seite 22
Paint spray gun with cup (Figure 13)
Working pressure in bar:
Range of applications:
The pain spray gun is ideal for all small
scale priming and painting work.
The adjustment of the air and paint
volumes helps to achieve outstanding
results.
The paint spray gun, with an infinite
adjustment from wide to round jet, is ideal
for both large areas and for corners and
edges.
Spray gun with suction-feed can
(Figure 14)
Working pressure in bar:
Range of applications:
Suitable for spraying cold cleaner, spray oil,
etc.
The infinitely variable trigger lever allows
an exact dosing of the spray material.
The rotating nozzle (c) allows you to adjust
the ratio of fluid to the volume of air.
Tip: Before starting work, you should
conduct a small test on newspaper to find
the ideal settings for achieving perfect
results.
set
Ball needle (Figure 15)
Uses: For pumping up balls.
The ball needle can be used to pump up
various types of balls.
TIP: To avoid damaging the valve, moisten
the ball needle slightly before inserting.
2-4
3-6