3
Starting Up
3.1
Safety notes
Caution: It is essential to read the General Information at the beginning of this manual
before starting up.
3.2
Checking the package contents
The package contains:
an answering machine
a telephone connection cable
3.3
Inserting batteries (not included in material supplied)
Before connecting the answering machine to the telephone network, insert a new 9 V battery. In the
event of a power failure, the battery will ensure data is retained for approx. 24 hours.
Note:
As soon as the \ icon appears in the display, the battery is empty and must be
replaced.
Pay attention that the answering machine is not connected to the telephone network at this point.
1. Use a small screwdriver to open the battery compartment on the underside.
2. Connect the battery plug to the battery and insert the battery in the battery compartment.
3. Close the battery compartment cover.
3.4
Connecting the telephone line and power adapter plug
1. Insert the small plug on the power adapter plug cable in the corresponding socket on the
rear side of the answering machine.
2. Insert the small plug on the telephone connection cable in the corresponding socket on
the rear side of the answering machine.
3. Plug the power adapter plug in a properly installed 230 Volt power outlet.
4. Connect the telephone connection cable supplied in the telephone line jack.
Note:
When switched on for the first time, the new answering machine requires approx.
30 seconds to initialize all the functions. After the first initialization, the message LCD
KONTRAST appears in the display.
3.5
Setting the language
On the right-hand side of the answering machine is a sliding switch (GER FRE). The sliding switch is
used to set the display language. You can select between German (GER) and French (FRE).
- Starting Up -
a power adapter plug
an operating manual
59