Battery - Tecno-gaz MasterFlux Smart Mode D'emploi

5.4

BATTERY

The device is equipped with a BATTERY that guarantees operation even in the event of a mains power
failure.
The charge is displayed on the screen
The representation is:
WHITE from 100% to 21%
YELLOW from 20% to 11%
RED from 10% to 0%
The autonomy is approximately 6 hours operating time (on delivery), but varies depending on factors
such as % of charge and battery life (charge/discharge cycles).
To charge the battery, the device must be switched on.
The recommended time for a full charge is 24 hours.
When the battery charge is low, the device indicates on the display, and with an acoustic message, to
switch off the device or connect it to the power supply, at this stage the device cannot be used.
Warning:
When charging the battery the charge indicator rises progressively, if the device is restarted during
charging, the indication may overestimate the actual battery charge. In this case, at the start of the cycle,
the charge level may decrease rapidly until the actual charge value is reached.
SWITCH OFF OR CONNECT THE DEVICE TO THE MAINS WHEN IT IS DISCHARGED
TO AVOID DAMAGING THE BATTERY
19 - 33
ENGLISH